7610 white screen - GSM-Forum

nasir shiwani · 12-23-2005, 23:32

HI ALL friends

I need experts idea i 've 7610 that was fall on floor by big shock then display went lcd connecter and pcb is ok but screen not show display also checked in other fone plz plz plz give any experimental idea

banalven1 · 01-05-2006, 02:20

your phone can make call or not???

nasir shiwani · 01-08-2006, 22:47

no sir phone can not dial and receive i thing it's condition is on <insert sim card> it,s my idea not sure

robz · 01-09-2006, 00:21

if the phone can receive call or can dial 112 then lcd part is the problem. check the connector and all line connected with lcd. but if can't make call then the problem is iether firmware,ic's,upp.....

banalven1 · 01-09-2006, 05:26

try flash your phone first but becareful it maybe make your cant on~~~~~~ because it drop set..........

jarniel · 01-09-2006, 14:39

try to change the upp i.c. or reflow it first... if it's the same prob. cahnge it much better then flash it again with a higher ver.... hope it will help

Javajohn · 01-09-2006, 20:37

SORRY BUGS JUST VISIT HERE FOR SOLUTION
http:///vbb/showthread.php?t=261084

.:Javajohn:.
MOBILEWALA TEAM

nasir shiwani · 01-10-2006, 01:17

thank's for reply friends I have already check print of lcd connector by meter those all are okay and re flash also but the problem is still and also failed to make call and receive and mobilewala team my set is 7610 i am finding this chip as you shown in pic but i am not succes to find this plz show me in 7610 dears sorry for my loss english

Javajohn · 01-10-2006, 10:29

Ok My Freind Just Take This Solution Of Urs 7610

jjfox04 · 01-15-2006, 09:03

I have the same white screen problem. What will I do?

naughtycell · 01-15-2006, 15:46

Quote:

Originally Posted by jjfox04

I have the same white screen problem. What will I do?

Fall on ground ? in case it is typicaly like it .
I think the previous problems was from a ripped source under any IC - may be Flash mem. or Power or prossesing , any thing !!
or may be you didnt follow the link added by " javajhon " ? did you follow the instructions he supplyes ?
Or did you tryed another new LCD ?

Javajohn · 01-16-2006, 07:42

ya just follow the insturction u will succed

nasir shiwani · 01-16-2006, 23:30

thank's guys but sorry at the moment my health not well after few days i 'll give result thank's again

bambo clan · 04-13-2006, 10:56

is it the ic 4 7610 lets be sure

Quote:

Originally Posted by .:Java:.

SORRY BUGS JUST VISIT HERE FOR SOLUTION
http:///vbb/showthread.php?t=261084

.:Javajohn:.
MOBILEWALA TEAM

**RAJESH** · 04-13-2006, 15:19

White Light Hang??? First You Chek How Much Time Your Phone On.after Some Minut Your Phone Is Automatic Off Step Here...little Hard..but You Try..
1--replace Flash Ic Nomber K8S6415ETA.. If.same Problem...
2--reball Uem....if Same...
3--reball Cpu..upp... 100% Solv Your Problem Whit Light Hang....

But All Thish Do Befor Replace Black Ic Mation On Pic..near Ringer Ic....

Thanx..

12-23-2005, 23:32	#1 (permalink)
nasir shiwani Insane Poster Join Date: Aug 2003 Location: karachi Age: 34 Posts: 69 Member: 36741 Status: Offline Thanks: 5 Thanked 5 Times in 4 Posts	7610 white screen HI ALL friends I need experts idea i 've 7610 that was fall on floor by big shock then display went lcd connecter and pcb is ok but screen not show display also checked in other fone plz plz plz give any experimental idea

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
7610 white screen all calls incoming outgoing flashed many version still white screen	GSMBALOCH	Nokia Hardware & Hardware-Repair Area	7	06-01-2009 20:54
7610 White Screen then Turns off, Urgent	msas	Nokia Hardware & Hardware-Repair Area	8	11-15-2006 02:34
7610 white screen after flashing a ppm	MELME	UFS2 + UFS3-Tornadoflasher	29	05-05-2006 01:53
7610 white screen!	reji	Nokia Hardware & Hardware-Repair Area	1	02-11-2006 14:47

01-05-2006, 02:20	#2 (permalink)
banalven1 Freak Poster Join Date: Nov 2005 Location: Malaysia Age: 33 Posts: 445 Member: 202941 Status: Offline Thanks: 611 Thanked 77 Times in 31 Posts	your phone can make call or not???

01-08-2006, 22:47	#3 (permalink)
nasir shiwani Insane Poster Join Date: Aug 2003 Location: karachi Age: 34 Posts: 69 Member: 36741 Status: Offline Thanks: 5 Thanked 5 Times in 4 Posts	no sir phone can not dial and receive i thing it's condition is on <insert sim card> it,s my idea not sure

01-09-2006, 00:21	#4 (permalink)
robz Freak Poster Join Date: Nov 2003 Location: Olympia Posts: 388 Member: 44950 Status: Offline Thanks: 4 Thanked 10 Times in 10 Posts	if the phone can receive call or can dial 112 then lcd part is the problem. check the connector and all line connected with lcd. but if can't make call then the problem is iether firmware,ic's,upp.....

01-09-2006, 05:26	#5 (permalink)
banalven1 Freak Poster Join Date: Nov 2005 Location: Malaysia Age: 33 Posts: 445 Member: 202941 Status: Offline Thanks: 611 Thanked 77 Times in 31 Posts	try flash your phone first but becareful it maybe make your cant on~~~~~~ because it drop set..........

01-09-2006, 14:39	#6 (permalink)
jarniel Freak Poster Join Date: May 2005 Location: ksa Age: 41 Posts: 304 Member: 149600 Status: Offline Thanks: 0 Thanked 9 Times in 8 Posts	try to change the upp i.c. or reflow it first... if it's the same prob. cahnge it much better then flash it again with a higher ver.... hope it will help

01-09-2006, 20:37	#7 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 32 Posts: 5,334 Member: 122246 Status: Offline Sonork: 100.50000 Thanks: 65 Thanked 5,125 Times in 579 Posts	SORRY BUGS JUST VISIT HERE FOR SOLUTION http:///vbb/showthread.php?t=261084 .:Javajohn:. MOBILEWALA TEAM

01-10-2006, 01:17	#8 (permalink)
nasir shiwani Insane Poster Join Date: Aug 2003 Location: karachi Age: 34 Posts: 69 Member: 36741 Status: Offline Thanks: 5 Thanked 5 Times in 4 Posts	thank's for reply friends I have already check print of lcd connector by meter those all are okay and re flash also but the problem is still and also failed to make call and receive and mobilewala team my set is 7610 i am finding this chip as you shown in pic but i am not succes to find this plz show me in 7610 dears sorry for my loss english

01-15-2006, 09:03	#10 (permalink)
jjfox04 Freak Poster Join Date: Aug 2004 Age: 39 Posts: 109 Member: 78236 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	I have the same white screen problem. What will I do?

01-16-2006, 07:42	#12 (permalink)
Javajohn No Life Poster Join Date: Mar 2005 Location: Facebook: Java John Age: 32 Posts: 5,334 Member: 122246 Status: Offline Sonork: 100.50000 Thanks: 65 Thanked 5,125 Times in 579 Posts	ya just follow the insturction u will succed

01-16-2006, 23:30	#13 (permalink)
nasir shiwani Insane Poster Join Date: Aug 2003 Location: karachi Age: 34 Posts: 69 Member: 36741 Status: Offline Thanks: 5 Thanked 5 Times in 4 Posts	thank's guys but sorry at the moment my health not well after few days i 'll give result thank's again

04-13-2006, 15:19	#15 (permalink)
RAJESH No Life Poster Join Date: Sep 2004 Location: INDIA Age: 37 Posts: 830 Member: 83237 Status: Offline Sonork: 100.1577738 Thanks: 225 Thanked 63 Times in 34 Posts	White Light Hang??? First You Chek How Much Time Your Phone On.after Some Minut Your Phone Is Automatic Off Step Here...little Hard..but You Try.. 1--replace Flash Ic Nomber K8S6415ETA.. If.same Problem... 2--reball Uem....if Same... 3--reball Cpu..upp... 100% Solv Your Problem Whit Light Hang.... But All Thish Do Befor Replace Black Ic Mation On Pic..near Ringer Ic.... Thanx..