Get All Your Problems Solved in 12 hours....

[gurukripa1982]

[QUOTE=shadab_a4u;1985193]

Originally Posted by adampurhawks

Hi!
I have 7610. It was not turning on. I wased it and applied some heat. Now it turns on with white display and some flickering color dots for 6-7 times and turns off. If flashed it with with 6.7 but didn't work. Set UI defaults failed. Plz help.

for v200 change power crystal and 7610 change bootloader ic if not then reball 2nd flash

[gurukripa1982]

Originally Posted by adampurhawks

Hi
Remove Antenna Switch and make a jumper like below

100% working

Adampur Hawks

reball or change rf ic

[gurukripa1982]

Originally Posted by rk19801

i having problem with 3300 contact service i try to flsh phone with ufs3 it flash complet factory setting also complet it on with normal mode with sim but after some time its shown contact service so pls help me how to flash phone how to use adsp software with ufs3 if it is possiable to use with ufs3 0r jaf pls send me adsp sw.exe file
thanking you

flash adsp area by jaf or mt box if problem not solve chage adsp ic

[gurukripa1982]

Originally Posted by efrcom

http:///vbb/showthread.php?t=330032

change light ic or coil below kepad

[gurukripa1982]

Originally Posted by drpavlov

Hi, I have a 6310, and the send button is not working. I cleared the pad, and also changed the little shiny bga, but still no results.. any help?
thanks in advance

first of all change shiny bga ic (keypad ic) or remove increasing decreasing volume switches at side

[gurukripa1982]

Originally Posted by adampurhawks

Here is the solution for
6630 Charging OK But no Power On

check on software that there is mistake in flash ic if it is not showing its id in software then reball it ur phone will be ok but first of all check its on/off switch

[gurukripa1982]

Originally Posted by swapnilbombay

1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 6
Platform: 6, Error Data:
F3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile

nokia 3660 dead
tell me what to do ?

change ram ic,reball uem first of all clean the pcb gently (ram,3 flashes, cpu)

[gurukripa1982]

Originally Posted by ummhere

i have 1100 which turns off automatically or in rintones option plz give solution plz plz plz

ur pm file is wrong load good pm then initsimlock,fulfactory defaults

[gurukripa1982]

Originally Posted by vikrambits

Can u please send me IMEI CHANGER FOR Nokia 6600.
I will be very thankfull to u . Thanks a lot .

\


change
uem and write new rpl from ufs

[gurukripa1982]

Originally Posted by j_prakashh

need solution for 3230 when switch on it shows only nokia..i flashed and formated but no use...reheated ram also but same result

change bootloader ic

[gurukripa1982]

Originally Posted by prnc

u might have damage ur flash ic with more heat reball ur ic or change it

reball power ic ,and then flashic

[gurukripa1982]

Originally Posted by hhhaslam

what is the best way to format my N-Gage (phone memory) ?
please provide a solution

ufs universal flasher box

[gurukripa1982]

Originally Posted by john_john

bro...ihave 6630 after charge battery full then hung up(freezed)the fon
help bro....

first flash it then change craging or poweric

[gurukripa1982]

Originally Posted by tm-gsm

nokia 6030. I cant enter in radio menu, flash with new werion sw, and the same, when i run solf tests in JAF show st radio test fail. Any idea?

change fm radio ic or rehot it or check ur handfree socket

[gurukripa1982]

Originally Posted by GSM RAJ

6020 water damaged. not charging when connect charger.

first try to clean ur pcb gently if not then write3220 pm to 6020 or reball power ic