Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware - GSM-Forum

Ipko · 03-11-2011, 13:15

Hello , this problem getting to me after trying 4.0.1 to downgrade on 3.1.3 ,
Then i have back to 4..0.1 but problem are the same.
againg back to 3.1.3 same again!

What is the problem who have any solution , what i need to do with this iPhone to get back againg on normal mode??????????????????????????????????

Underdog · 03-11-2011, 13:18

Try this thread from yesterday: Yesterdays Thread

Ipko · 03-11-2011, 13:41

Quote:

Originally Posted by Underdog

Try this thread from yesterday: Yesterdays Thread

and problem are not same !?!?
My iPhone not show me wifi , BT , imei , iccid , modem firmware?

also i have try to search before posting on forum but maybe i dont know how , but i have find nothing!

thank you

Ipko · 03-11-2011, 14:28

is it sowftare problem , or hardware problem!
and for what face this problem?

sprouts1 · 03-23-2011, 17:01

Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware

I have exactly the same

Long story and learning/trying really hard but at the mo very

Lad updated my 3g to 4.1 big mistake with 5.14.2

So tried the
How to Downgrade iOS 4.1 (Baseband 05.14.2) to iOS 4.0 (Baseband 05.13.4) Using Fuzzyband

All went seemingly OK as I had 5.08 bootloader.

On reboot my jailbreak seemed still there but phone would give message after about 1 or two minutes of running of
"restore needed, restore from itunes"
It would then reboot and stays in this loop

If I go into the settings ABOUT it is there that the info for / no wifi / no Imei / no ICCID / no modem firmware ALL BLANK????

Built new 4.2.1 maintaining baseband (sn0breez....) and loaded that.

All went fine but still stuck in a loop with no / no wifi / no Imei / no ICCID / no modem firmware Still all BLANK????

Please, please help

Is this fixable? Is it a case of ipad 6.xxx ???

Thanks

sprouts1 · 03-23-2011, 23:43

Have broken loop with tinyumb...

Do not want to attempt any more without some advice, so if you can help with my mess described in the previous post it would be so greatly appreciated.

sprouts1 · 03-24-2011, 17:43

No one ?

Really would appreciate a genius popping in

bpcentergtk · 03-24-2011, 17:52

Just disassemble the handset check the board properly and battery too.

sprouts1 · 03-24-2011, 18:16

Quote:

Originally Posted by bpcentergtk

Just disassemble the handset check the board properly and battery too.

Thanks for taking the time to reply, however this phone was working 100% till I decided to go to 4.1. This worked but no unlock as bas band was upgraded!!

So used the fuzzy band as as my boot loader was 5.08 and then ended up with the issues described no wifi, no firmware etc

sprouts1 · 03-26-2011, 00:00

Quote:

Originally Posted by bpcentergtk

Just disassemble the handset check the board properly and battery too.

All sorted now

luckily had the common sense to ignore this very poor advice

kittyangel16 · 03-26-2011, 09:49

run the red snow and update again the base band thats it

i'd try so many time

kooolchief · 03-26-2011, 19:29

i had the same problem wid my friends 3g today, fixed it using redsnow and 4.2 orignal fw
tick on ipad baseband(this will upgrade ur basbeband 6.11 and ur imei,wifi and iccid back)
be sure dat u have da same 4.2 fw already installed on ur iphone before running redsnow
u can later unlock it using ultrasnow from cydia

Quote:

Originally Posted by Ipko

Hello , this problem getting to me after trying 4.0.1 to downgrade on 3.1.3 ,
Then i have back to 4..0.1 but problem are the same.
againg back to 3.1.3 same again!

What is the problem who have any solution , what i need to do with this iPhone to get back againg on normal mode??????????????????????????????????

Unlock_Master · 03-27-2011, 13:41

Download the correct orinigal firmware and the custom firmware for your iphone such as 4.1 or 4.2.1 etc

1. Open redsnow input the correct oringal firmware click next
2. Put the device in "just enter pwned mode dfu mode"
3. Once the device is in dfu mode open itunes
4. Auto itunes will detect the iphone in dfu mode
5. Right click on restore and chose the correct custom firmware not orinigal firmware
6. Once completed activiated the iphone if you can if not move on to the next step.
7. Now we got the iphone working on the correct custom firmware open redsnow again.
8. Chose the orignial firmware whitch is matching with iphone.
9. Click on install cydia and ipad baseband click next.
10. Once finished you shall see your iphone rebooting and imei everything is restored back to original.

If step 9 dont work just install ipad baseband you may already have cydia install when flashed with custom firmware.

:d

mrkhanz

EJAZGUL · 04-08-2011, 09:27

anybody tested this solution
is it work pls tel me

thanks

UnlockingPoint · 05-01-2011, 13:26

Quote:

Originally Posted by mrkhanz

Download the correct orinigal firmware and the custom firmware for your iphone such as 4.1 or 4.2.1 etc

1. Open redsnow input the correct oringal firmware click next
2. Put the device in "just enter pwned mode dfu mode"
3. Once the device is in dfu mode open itunes
4. Auto itunes will detect the iphone in dfu mode
5. Right click on restore and chose the correct custom firmware not orinigal firmware
6. Once completed activiated the iphone if you can if not move on to the next step.
7. Now we got the iphone working on the correct custom firmware open redsnow again.
8. Chose the orignial firmware whitch is matching with iphone.
9. Click on install cydia and ipad baseband click next.
10. Once finished you shall see your iphone rebooting and imei everything is restored back to original.

If step 9 dont work just install ipad baseband you may already have cydia install when flashed with custom firmware.

:d

mrkhanz

doesnt work at all

03-11-2011, 13:15	#1 (permalink)
Ipko No Life Poster Join Date: May 2010 Posts: 1,113 Member: 1295985 Status: Offline Thanks: 80 Thanked 90 Times in 57 Posts	Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware Hello , this problem getting to me after trying 4.0.1 to downgrade on 3.1.3 , Then i have back to 4..0.1 but problem are the same. againg back to 3.1.3 same again! What is the problem who have any solution , what i need to do with this iPhone to get back againg on normal mode??????????????????????????????????

03-23-2011, 17:01	#5 (permalink)
sprouts1 Junior Member Join Date: Mar 2011 Posts: 5 Member: 1542131 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware Iphone 3G / no wifi / no Imei / no ICCID / no modem firmware I have exactly the same Long story and learning/trying really hard but at the mo very Lad updated my 3g to 4.1 big mistake with 5.14.2 So tried the How to Downgrade iOS 4.1 (Baseband 05.14.2) to iOS 4.0 (Baseband 05.13.4) Using Fuzzyband All went seemingly OK as I had 5.08 bootloader. On reboot my jailbreak seemed still there but phone would give message after about 1 or two minutes of running of "restore needed, restore from itunes" It would then reboot and stays in this loop If I go into the settings ABOUT it is there that the info for / no wifi / no Imei / no ICCID / no modem firmware ALL BLANK???? Built new 4.2.1 maintaining baseband (sn0breez....) and loaded that. All went fine but still stuck in a loop with no / no wifi / no Imei / no ICCID / no modem firmware Still all BLANK???? Please, please help Is this fixable? Is it a case of ipad 6.xxx ??? Thanks

03-26-2011, 09:49	#11 (permalink)
kittyangel16 Junior Member Join Date: Dec 2010 Posts: 2 Member: 1467537 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	sulotion for no imie 3g or 3gs run the red snow and update again the base band thats it i'd try so many time

03-27-2011, 13:41	#13 (permalink)
Unlock_Master Freak Poster Join Date: Aug 2010 Location: UK Posts: 216 Member: 1379587 Status: Offline Sonork: 100.1619552 Thanks: 18 Thanked 22 Times in 13 Posts	Iphone blank imei fix Download the correct orinigal firmware and the custom firmware for your iphone such as 4.1 or 4.2.1 etc 1. Open redsnow input the correct oringal firmware click next 2. Put the device in "just enter pwned mode dfu mode" 3. Once the device is in dfu mode open itunes 4. Auto itunes will detect the iphone in dfu mode 5. Right click on restore and chose the correct custom firmware not orinigal firmware 6. Once completed activiated the iphone if you can if not move on to the next step. 7. Now we got the iphone working on the correct custom firmware open redsnow again. 8. Chose the orignial firmware whitch is matching with iphone. 9. Click on install cydia and ipad baseband click next. 10. Once finished you shall see your iphone rebooting and imei everything is restored back to original. If step 9 dont work just install ipad baseband you may already have cydia install when flashed with custom firmware. :d mrkhanz

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-11-2011, 13:18	#2 (permalink)
Underdog Freak Poster Join Date: Dec 2004 Location: UK Posts: 366 Member: 99686 Status: Offline Thanks: 0 Thanked 128 Times in 101 Posts	Try this thread from yesterday: Yesterdays Thread

03-11-2011, 14:28	#4 (permalink)
Ipko No Life Poster Join Date: May 2010 Posts: 1,113 Member: 1295985 Status: Offline Thanks: 80 Thanked 90 Times in 57 Posts	is it sowftare problem , or hardware problem! and for what face this problem?

03-23-2011, 23:43	#6 (permalink)
sprouts1 Junior Member Join Date: Mar 2011 Posts: 5 Member: 1542131 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Have broken loop with tinyumb... Do not want to attempt any more without some advice, so if you can help with my mess described in the previous post it would be so greatly appreciated.

03-24-2011, 17:43	#7 (permalink)
sprouts1 Junior Member Join Date: Mar 2011 Posts: 5 Member: 1542131 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	No one ? Really would appreciate a genius popping in

03-24-2011, 17:52	#8 (permalink)
bpcentergtk Freak Poster Join Date: Jul 2006 Location: India(Sikkim) Posts: 198 Member: 311436 Status: Offline Thanks: 3 Thanked 34 Times in 20 Posts	Just disassemble the handset check the board properly and battery too.

04-08-2011, 09:27	#14 (permalink)
EJAZGUL No Life Poster Join Date: Nov 2007 Location: In Apple Device Posts: 4,116 Member: 638481 Status: Offline Sonork: 100.1601053 Thanks: 438 Thanked 757 Times in 575 Posts	anybody tested this solution is it work pls tel me thanks

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
no one can unlock 6110 05.40 25-5-99	fondas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	12	09-02-2012 19:17
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	28	08-30-2012 03:40
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	07-31-2012 20:09
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	04-06-2012 16:22
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	11-21-2011 00:44