MStar USB Drivers and Step-by-Step guide on how to connect with UCT Box - GSM-Forum

**nonu_don** · 03-26-2011, 13:30

Easy instructions on: How to work on MStar CPU handsets

To connect MStar PCU handsets you will need USB drivers for these phones. These USB drivers can be download now from UCT Box support area. Or also can download from here.

Correct Steps to connect and work on a MStar CPU based handset:

First u need to read information of the handset. Go to “MStar” tab, select “ReadInfo”, select option according to CPU type. If you don't know the CPU boot type then you can try "B1" and "B2" one-by-one.
Press “Start”.
Now you don't need to power on the phone in MStar handsets. It will automatically start sensing the pinouts. After finding the pinouts the phone will ask for usb drivers. MStar USB drivers are located under folder “MStar_USB_Driver” or can download from here. If you have already installed the drivers then system will not ask for drivers next time.
After installing drivers, software will connect to your MStar handset and will read information which will be displayed on the bottom.
You can now read in it that which type is the CPU and flash memory of the handset and then proceed further by selecting appropriate in the options.
After you have selected the correct CPU type in the options, now you can start with Format, Read Flash, Write Flash, Repair IMEI, etc.

Download MStar USB Drivers from here!!!

Br.
Naman

abhaypatna2 · 03-29-2011, 11:37

Dear sir pin find but driver not work plz help me urgent

**nonu_don** · 04-01-2011, 22:38

what problem with drivers? please explain.

Br.
Naman

S!DD · 07-04-2011, 15:17

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
D-=7 D+=6
Done.
Detecting USB device...

thats it.....not going ahead than this

**nonu_don** · 07-05-2011, 05:51

Quote:

Originally Posted by S!DD

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
D-=7 D+=6
Done.
Detecting USB device...

thats it.....not going ahead than this

1. please check USB drivers for MStar. you can download these drivers from support area.
2. If drivers already installed, then un-install them and re-install again
3. If still not work, then try to make comm port number asigned to MStar drivers lower than 10
4. Or else please try to change CPU Boot and try again.

Br.
Naman

aiz · 10-15-2011, 10:47

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
D-=7 D+=6
Done.
Detecting USB device..

mstar usbdrivers neeedeeed
help meee.....

**nonu_don** · 11-03-2011, 19:27

Quote:

Originally Posted by aiz

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
D-=7 D+=6
Done.
Detecting USB device..

mstar usbdrivers neeedeeed
help meee.....

Sir,
Drivers for MStar CPU handsets are available inside every installer.
You can download the latest setup, ie v4.40 from support area. After installing it, you will get drivers installed automatically in C:\UCT\4.40\Drivers\

Also you can download them directly from our UCT Box official support area on UCT Box - Support

Br.
Naman

1_2_3_4 · 12-08-2011, 06:56

dear sir

i face same problem ?
plz help me give me any solution
[IMG]

Uploaded with ImageShack.us[/IMG]

choplal · 12-31-2011, 04:35

plz salect best box for china phone mstar cpu/mtk /spreadtrum

1. avator box
2. uct box
3.other box
plz any body ans thish question

**nonu_don** · 01-03-2012, 13:10

Quote:

Originally Posted by 1_2_3_4

dear sir

i face same problem ?
plz help me give me any solution
[IMG]

Uploaded with ImageShack.us[/IMG]

Sir,
make sure that you have installed the latest version of UCT Software and also installed the drivers exe supplied inside the installer.

Also you can find more details about drivers installation in the users manual with the UCT Box here: User Instructions Manual for UCT in English & Hindi !!!

Br.
Naman

ekamil · 04-10-2012, 23:04

uct doesnt support fully mstar cpu

**nonu_don** · 04-11-2012, 05:49

Quote:

Originally Posted by ekamil

uct doesnt support fully mstar cpu

can u please describe what problem do you have. Maybe we can try to help u out.

Br.
Naman

PRAVEEN VERMA · 04-20-2012, 08:35

thanksssssssss............sir

janu_shivam · 04-20-2012, 16:18

uct can't read anda backup M STAR 8532
Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast,please hold on the phone Power key
D-=2 D+=3
Detecting USB device...
USB mass storage device found[ J:]

janu_shivam · 04-20-2012, 16:19

uct can't read anda backup M STAR 8532

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast,please hold on the phone Power key
D-=2 D+=3
Done.
Detecting USB device...
USB mass storage device found[ I:]
SyncACK Error:0x00

how can to support uct box

03-26-2011, 13:30	#1 (permalink)
nonu_don Product Manager Join Date: Feb 2003 Location: ..::India::.. Age: 29 Posts: 3,806 Member: 22538 Status: Offline Sonork: 100.67180 Thanks: 153 Thanked 2,242 Times in 444 Posts	MStar USB Drivers and Step-by-Step guide on how to connect with UCT Box Easy instructions on: How to work on MStar CPU handsets To connect MStar PCU handsets you will need USB drivers for these phones. These USB drivers can be download now from UCT Box support area. Or also can download from here. Correct Steps to connect and work on a MStar CPU based handset: First u need to read information of the handset. Go to “MStar” tab, select “ReadInfo”, select option according to CPU type. If you don't know the CPU boot type then you can try "B1" and "B2" one-by-one. Press “Start”. Now you don't need to power on the phone in MStar handsets. It will automatically start sensing the pinouts. After finding the pinouts the phone will ask for usb drivers. MStar USB drivers are located under folder “MStar_USB_Driver” or can download from here. If you have already installed the drivers then system will not ask for drivers next time. After installing drivers, software will connect to your MStar handset and will read information which will be displayed on the bottom. You can now read in it that which type is the CPU and flash memory of the handset and then proceed further by selecting appropriate in the options. After you have selected the correct CPU type in the options, now you can start with Format, Read Flash, Write Flash, Repair IMEI, etc. Download MStar USB Drivers from here!!! Br. Naman

12-08-2011, 06:56	#8 (permalink)
1_2_3_4 Crazy Poster Join Date: Apr 2006 Posts: 51 Member: 265160 Status: Offline Thanks: 28 Thanked 3 Times in 3 Posts	need ok mstar usb driver dear sir i face same problem ? plz help me give me any solution [IMG] Uploaded with ImageShack.us[/IMG]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	05-21-2013 19:20
DES key Driver	black	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	07-19-2012 05:32
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	11-15-2011 12:08
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	05-25-2009 16:29

03-29-2011, 11:37	#2 (permalink)
abhaypatna2 Major Poster Join Date: Dec 2009 Posts: 43 Member: 1181203 Status: Offline Thanks: 1 Thanked 5 Times in 4 Posts	Dear sir pin find but driver not work plz help me urgent

04-01-2011, 22:38	#3 (permalink)
nonu_don Product Manager Join Date: Feb 2003 Location: ..::India::.. Age: 29 Posts: 3,806 Member: 22538 Status: Offline Sonork: 100.67180 Thanks: 153 Thanked 2,242 Times in 444 Posts	what problem with drivers? please explain. Br. Naman

07-04-2011, 15:17	#4 (permalink)
S!DD Freak Poster Join Date: Oct 2009 Location: HEART OF !ND!A. JABALPUR Age: 19 Posts: 300 Member: 1150164 Status: Offline Sonork: 100.1593001 Thanks: 42 Thanked 46 Times in 33 Posts	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key D-=7 D+=6 Done. Detecting USB device... thats it.....not going ahead than this

10-15-2011, 10:47	#6 (permalink)
aiz Freak Poster Join Date: Apr 2007 Location: PAKISTAN KPK Swabi Posts: 150 Member: 482685 Status: Online Thanks: 54 Thanked 7 Times in 7 Posts	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key D-=7 D+=6 Done. Detecting USB device.. mstar usbdrivers neeedeeed help meee.....

12-31-2011, 04:35	#9 (permalink)
choplal Major Poster Join Date: Jun 2009 Location: jhalap cg Posts: 46 Member: 1061265 Status: Offline Thanks: 16 Thanked 0 Times in 0 Posts	plz salect best box for china phone mstar cpu/mtk /spreadtrum 1. avator box 2. uct box 3.other box plz any body ans thish question

04-10-2012, 23:04	#11 (permalink)
ekamil Crazy Poster Join Date: Jan 2007 Posts: 55 Member: 429761 Status: Offline Thanks: 3 Thanked 3 Times in 3 Posts	uct doesnt support fully mstar cpu

04-20-2012, 08:35	#13 (permalink)
PRAVEEN VERMA Crazy Poster Join Date: May 2007 Posts: 58 Member: 511593 Status: Offline Thanks: 14 Thanked 1 Time in 1 Post	thanksssssssss............sir

04-20-2012, 16:18	#14 (permalink)
janu_shivam Insane Poster Join Date: Feb 2010 Posts: 95 Member: 1232828 Status: Offline Sonork: durga Thanks: 4 Thanked 3 Times in 3 Posts	uct can't read anda backup M STAR 8532 Initializing... DA_LIB_VER_3.6.7.1 It is sensing the pinout fast,please hold on the phone Power key D-=2 D+=3 Detecting USB device... USB mass storage device found[ J:]

04-20-2012, 16:19	#15 (permalink)
janu_shivam Insane Poster Join Date: Feb 2010 Posts: 95 Member: 1232828 Status: Offline Sonork: durga Thanks: 4 Thanked 3 Times in 3 Posts	uct can't read anda backup M STAR 8532 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key D-=2 D+=3 Done. Detecting USB device... USB mass storage device found[ I:] SyncACK Error:0x00 how can to support uct box